Y-cam Multilanguage Manual de usuario descargar pdf (Pagina 4)

Quick Start Guide

It is highly recommended that you read the User Manual for your model in full to get the best from your Y-cam. The User

Manual can be found on the Setup CD-Rom, or downloaded from y-cam.com. If you are not se ng up your Y-cam via a router/

modem, please refer to the User Manual. Diﬀ erent models of Y-cam may vary slightly in layout and design compared to this

Quick Start Guide, but this will give you a general overview of how to operate your camera.

Tip: If you are experiencing diﬃ culty accessing the camera, or with certain se ngs, it may be necessary to turn the power oﬀ

and on again to the Y-cam and/or your router.

If you are having problems with your Y-cam, it could be worth checking for updated versions of the manual or camera ﬁ rmware

from our website: h p://www.y-cam.com. For direct support, always consult your place of purchase ﬁ rst. Y-cam have a

comprehensive support and help sec on on our website: h p://www.y-cam.com

Warning

• Do not place the Y-cam next to heat sources

• Do no disassemble the Y-cam.

• Do not place the Y-cam in high humidity environments.

• Only use the Power Adaptor supplied, or oﬃ cial Y-cam Power Adaptor replacements.

• Be sure to use the correct Power Adaptor for your camera – diﬀ erent models require diﬀ erent Power Adaptors.

• Unless speciﬁ ed, Y-cam cameras should only be used indoors.

• Unless speciﬁ ed, keep the Y-cam away from water. If the Y-cam gets wet, power oﬀ immediately.

• This Y-cam is designed for indoor use only (unless used inside Y-cam Shell).

• Keep the Y-cam away from water. If the Y-cam gets wet, power oﬀ immediately.

Connec ng a Y-cam to your network

A PC or Mac is required for the ini al setup of a Y-cam only and once the camera is conﬁ gured, a Y-cam can be used

independently without being connected to a computer.

Using the Network Cable provided, plug one end in to your router/modem (your local network), and the other end in to the

Y-cam. Connect the Power Adaptor to the power port on the Y-cam and the other end in to an electrical socket, and switch on

the power. You must then use a computer connected to this local network to complete the installa on.

PC Setup Instruc ons

Insert the Setup CD-Rom and the Installa on screen will appear (if it does not, locate the CD Drive within Windows and open

Autorun.exe).

Click “Install So ware”. This will install Y-cam Setup which allows you to ﬁ nd your camera on your network. Windows may ask

whether you wish to “Allow” or “Block” the so ware install. Click “Allow”. Then follow the instruc ons onscreen. The program

will install a shortcut icon on to your desktop. A er the installa on ﬁ nishes click “Exit” to close the Installa on screen.

Double-click the new Y-cam Setup icon on your desktop to run the program. The program will search for the camera(s)

connected to your local network and display any it ﬁ nds. Use this program any me you need to ﬁ nd your camera on your local

network - to view it or to change its se ngs.

Each camera a ached and found on your cal network will have an internal IP address assigned to it, and displayed. See Fig.1

Select the camera you wish to connect to and click “Open”. This will open up the cameras Homepage in a new web browser

window.

Mac Setup Instruc ons

Insert the Setup CD-Rom. Locate the “Mac” folder on the disc and open the “Y-cam” program. This will install the Y-cam Setup

so ware and place a shortcut to the so ware on your desktop.

Open the new Y-cam Setup program from your desktop. The program will search for the camera(s) connected to your local

network and display any it ﬁ nds. Use this program any me you need to ﬁ nd your camera on your local network - to view it or

to change its se ngs.

1 2 3 4 5 6 7 8 9 ... 27 28

Comentarios a estos manuales

Sin comentarios

Y-cam Multilanguage Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Videovigilancia Y-cam Multilanguage